Hot-dipped galvanized S220GD/DX51D

Used for everything from simple bending and pressing to advanced deep drawing and roll forming. This plate is available for processing and delivery in thicknesses from 0,35-4,00 mm.
We have extensive experience of working with steel mills both inside and outside Europe. If you need other dimensions / qualities apart from that you can see here, please do not hesitate to contact us.

Width 1000  1250 1500
Thickness      
0,40   Z100MAC | Z275MAC  
0,50   Z275MAC  
0,60   Z275MAC  
0,70   Z100MAC | Z275MAC Z275MAC
0,80 Z275MAC Z275MAC Z275MAC
0,90   Z275MAC Z275MAC
1,00 Z275MAC Z100MAC | Z275MAC Z275MAC
1,25 Z275MAC Z275MAC Z100MAC | Z275MAC
1,50 Z275MAC Z100MAC | Z275MAC Z275MAC
2,00 Z275MAC Z100MAC | Z275MAC Z275MAC
2,50   Z275MAC  
3,00      

 

Click here to download Documentation


Mechanical Properties - Mild steels

EN 10327 Stäckgräns Ro(N/mm2) Brottgräns Rm (N/mm2)
Förlängning A80 min. (%)*
DX51D Min. 140 270 - 500
22
S220GD 220 300 20

The values are based on the sample taken across the rolling direction. *For ≤0.70 mm, two units of lower value apply.



Hot-dipped galvanized DX54D

Used for everything from simple bending and pressing to advanced deep drawing and roll forming. This plate is available for processing and delivery in thicknesses from 0,35-4,00 mm.
We have extensive experience of working with steel mills both inside and outside Europe. If you need other dimensions / qualities apart from that you can see here, please do not hesitate to contact us.

Width 1000  1250 1500
Thickness      
0,40   Z100MAC | Z275MAC  
0,50   Z275MAC  
0,60   Z275MAC  
0,70   Z100MAC | Z275MAC Z275MAC
0,80 Z275MAC Z275MAC Z275MAC
0,90   Z275MAC Z275MAC
1,00 Z275MAC Z100MAC | Z275MAC Z275MAC
1,25 Z275MAC Z275MAC Z100MAC | Z275MAC
1,50 Z275MAC Z100MAC | Z275MAC Z275MAC
2,00 Z275MAC Z100MAC | Z275MAC Z275MAC
2,50   Z275MAC  
3,00      

 

Click here to download Documentation


Mechanical Properties - Mild steels

EN 10327 Yield strength Ro(N/mm2) Tensile strength Rm (N/mm2)
Elongation A80 min. (%)*
DX54D 140-220 270-350
36

The values are based on the sample taken across the rolling direction. *For ≤0.70 mm, two units of lower value apply



Hot-dipped galvanized S350GD

Used for everything from simple bending and pressing to advanced deep drawing and roll forming. This plate is available for processing and delivery in thicknesses from 0.35-4.00 mm.
We have extensive experience of working with steel mills both inside and outside Europe. If you need other dimensions / qualities apart from that you can see here, please do not hesitate to contact us.

Width 1000  1250 1500
Thickness      
1,00     Z275MAC
1,20     Z275MAC
1,30     Z275MAC
1,50      
2,00     Z275MAC
2,50     Z275MAC
3,00      
4,00   Z275MAC  

 

Click here to download Documentation


Mechanical Properties - Mild steels

EN 10327 Yield strength Ro(N/mm2) Tensile strength Rm (N/mm2)
Elongation A80 min. (%)*
S350GD 350 420
16

The values are based on the sample taken across the rolling direction. *For ≤0.70 mm, two units of lower value apply.



Kontakta

Jonathan Fyhr

Jonathan Fyhr

Divisionschef SSC
0766-34 33 32
jonathan.fyhr@areco.se


Tobias Eberstål

Tobias Eberstål

Säljare SSC
0736-23 86 76
tobias.eberstal@areco.se


Fredrik Bergman

Fredrik Bergman

Säljare SSC
0727-21 72 00
fredrik.bergman@areco.se